 |
|
|
|
|
|
|
 |
 |
 |
|
|||
 |
|
|||||
2021 Arch St., Philadelphia, PA 19103
Phone: 856.491.5901 |
|
|||||
 |
|
|||||
 |
 |
 |
 |
|
||
 |
 |
|||||
Material Data Sheets - Chart 4
|
Property |
Units | Test Method ASTM |
Poly- sulfone |
Poly- propylene |
Torlon® 4203 |
Torlon® 4301 |
Ultem® Poly- etherimide |
| Specific Gravity | -- | D-792 | 1.24 | .90 | 1.40 | 1.45 | 1.27 |
| Tensile Strength, 73°F | psi | D-638 | 10,200 | 4,500 | 26,900(4) | 15,200 | |
| Tensile
Modulus of Elasticity, 73°F |
psi | D-638 | 360,000 | 190,000 | 730,000 | -- | 430,000 |
| Elongation, 73°F | % | D-638 | 50-100 | 12 | 6 | 60 | |
| Flexoral Strength, 73°F | psi | D-790 | 15,400 | 6,400 | 30,700 | 26,400 | 21,000 |
| Flexoral
Modulus of Elasticity, 73°F |
psi | D-790 | 390,000 | 230,000 | 660,000 | 920,000 | 480,000 |
| Shear Strength, 73°F | psi | D-732 | -- | 5,710 | 18,500 | 15,000 | |
| Compressive Strength | psi | D-695 | -- | 6,720 | 32,000 | 30,000 | |
| Compressive
Modulus of Elasticity, 73°F |
psi | D-695 | -- | 450,000 | 680,000 | 420,000 | |
| Coefficient of Friction (Dry vs. Steel) Dynamic | -- | -- | -- | -- | -- | -- | |
| Hardness, Rockwell, 73°F | -- | D-785 | R120 | 95 | E78 | -- | M109 |
| Hardness, Durometer, 73°F | -- | D-676 | -- | -- | M119 | M120 | -- |
| Tensile Impact, 73°F | ft.lb. / in(2) | D-1822 | 200 | - | -- | -- | -- |
| Property | Units | Test Method ASTM |
Poly- sulfone |
Poly- propylene |
Torlon® 4203 |
Torlon® 4301 |
Ultem® Poly- etherimide |
| >Water Absorption, Immersion (24 hours) | % | D-570 | .03 | .03 | 0.28 | 0.22 | 0.25 |
| Water Absoption, Saturation | % | D-570 | -- | -- | -- | -- | 1.20 |
| Acids, Weak, 73°F | -- | -- | A | -- | A | A | A |
| Acids, Strong, 73°F | -- | -- | A | -- | A | A | A |
| vAlkalies, Weak, 73°F | -- | -- | A | -- | L | A | |
| Strong, 73°F | -- | -- | A | -- | U | L | |
| Hydrocarbons, Aromatic, 73°F | -- | U | -- | A | A | A | |
| Hydrocarbons, Aliphatic, 73°F | -- | -- | -- | -- | A | A | A |
| Ketones, 73°F | -- | -- | U | -- | A | A | A |
| Ethers, 73°F | -- | -- | -- | U | A | A | -- |
| Esters, 73°F | -- | -- | -- | A | A | A | -- |
| Alcohols, 73°F | -- | -- | -- | A | A | A | |
| Inorganic Salt Solutions, 73°F | -- | -- | -- | -- | A | A | -- |
| Continuous Sunlight, 73°F | -- | -- | -- | L | L | -- |
Key
| A | = Acceptable Service | (1) | ASTM B-1457 used for thin specimens |
| L | = Limited Service | (2) | .080" thick |
| U | ptable | (3) | , 4,000 psi |
| NR | = Not Rated | (4) | ASTM
D-1708 (1/8" thick specimen @ .05"/min.) |
| -- | = Must Check Concentration | (5) | 150 F, 4,000 psi |
| (6) | .040" thick | ||
| (7) | Specimen 1/8"
thick, 2" diameter |
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
 |
|
|||||
 |
 |
 |
|
|
|||||
 |
 |
|
|||||||